1. Stabilizer link

When the suspension is installed, one end of the stabilizer bar link is connected to the stabilizer bar through a rubber bush, and the other end is connected to the control arm or the barrel shock absorber through a rubber bush or ball joint. The stabilizer bar link is symmetrical in the selection. Use, its role in improving operational stability.

2. Tie rod

When the suspension is installed, the rubber bushing at one end of the tie rod is connected with the frame or the body, and the rubber bushing at the other section is connected with the wheel hub. This type of control arm is mostly used in the multi-link suspension of the automobile and the tie rod of the steering system, which mainly bears the lateral load and guides the wheel movement at the same time.

3. Tie rod

Tie rods are mostly used for drag-type suspensions to transmit traction and braking force.

4. Single control arm

Such automotive control arms are mostly used in multi-link suspensions, where two single control arms are used together to transmit lateral and longitudinal loads from the wheels.

5. Fork (V) Arm

This type of vehicle control arm is mostly used for the upper and lower arms of the double wishbone independent suspension or the lower arm of the McPherson suspension, and the fork structure of the arm body mainly transmits lateral loads.

6. Triangle Arm

This type of car control arm is mostly used in the lower arm of the front suspension McPherson suspension to transmit lateral and longitudinal loads and control the relative movement of the wheel and the body.